METHOD FOR DETERMINING THE POSITION OF THE POINTS FOR ATTACHMENT OF WARP AND BACKSTROPS TO TRAWL BOARDS
https://doi.org/10.26428/1606-9919-2020-200-184-192
Abstract
Technique for analytical determining where the warp and backstrops should be attached to trawl board is proposed. The algorithm is developed for both triangular and quadrangular arrangement of the backstrops. Equations for calculation of the backstrops length are presented. Equilibrium stability conditions are defined for trawl doors.
About the Authors
V. I. Gabryuk
Far-Eastern State Technical Fisheries University
Russian Federation
Russian Federation
Gabryuk Victor I., D.Tech., professor, head of research school
52B, Lugovaya Str., Vladivostok, 690087
V. V. Kudakaev
Far-Eastern State Technical Fisheries University
Russian Federation
Russian Federation
Kudakaev Vasily V., Ph.D., senior lecturer
52B, Lugovaya Str., Vladivostok, 690087
L. A. Gabryuk
Maritime State University
Russian Federation
Russian Federation
Gabryuk Ludmila A., Ph.D., senior lecturer
50a, Verkhneportovaya Str., Vladivostok, 690003
References
1. Bronstein, I.N. and Semendyaev, K.A., Spravochnik po matematike dlya inzhenerov i uchashchikhsya vtuzov (A reference book in mathematics for engineers and students of technical colleges), St. Petersburg: Lan’, 2010.
2. Gabryuk, V.I., Mekhanika orudii rybolovstva v matematicheskikh modelyakh, algoritmakh, komp’yuternykh programmakh (Mechanics of Fishing Gear in Mathematical Models, Algorithms, and Computer Programs), Vladivostok: Dal’rybvtuz, 2011.
3. Gabryuk, V.I., Proektirovanie i modelirovanie orudii okeanicheskogo rybolovstva (Design and Simulation of Ocean Fishing Gear), Vladivostok: Dal’rybvtuz, 2016.
4. Gabruk, V.I. and Kornienko, I.A., General method for computer modeling of trawl doors, Izv. Tikhookean. Nauchno–Issled. Inst. Rybn. Khoz. Okeanogr., 2016, vol. 185, pp. 251-258.
5. Karpenko, V.P. and Fridman, A.L., Ustroystva raskrytiya rybolovnykh tralov (Devices for disclosing fishing trawls), Moscow: Pishchevaya promyshlennost’, 1980.
6. Kornienko, I.A., Method for determination of hydrodynamic parameters of trawl doors by means of software SolidWorks Flow Simulation, Izv. Tikhookean. Nauchno–Issled. Inst. Rybn. Khoz. Okeanogr., 2016, vol. 185, pp. 259-266.
7. Rosenstein, M.M. and Nedostup, A.A., Mekhanika orudiy rybolovstva (Mechanics of fishing tools), Moscow: Morkniga, 2011.
8. Rykunov, E.M., Studies on the trawl of the seven designs for pelagic trawling, Izv. Tikhookean. Nauchno–Issled. Inst. Rybn. Khoz. Okeanogr., 1972, vol. 84, pp. 6-37.
9. Reite, K.-J., Modeling and control of trawl systems, Doctoral thesis for the degree of doctor ingeniør, Trondheim: NTNU, 2006.
10. Stengel, H. and Fridman, A.L., Fishfanggeräte, Berlin: Veb Verlag Technik, 1977.
Review
For citations:
Gabryuk V.I., Kudakaev V.V., Gabryuk L.A. METHOD FOR DETERMINING THE POSITION OF THE POINTS FOR ATTACHMENT OF WARP AND BACKSTROPS TO TRAWL BOARDS. Izvestiya TINRO. 2020;200(1):184-192. (In Russ.) https://doi.org/10.26428/1606-9919-2020-200-184-192
Views:
372
Email this article 